Siemens VS08G Series Instructions For Use Manual page 15

When the work is done
Switch the vacuum cleaner off and unplug the power
cord from the mains.
Tug the power cord and let go. The cable then
rewinds automatically.
To reactivate or deactivate the cable brake, quickly
tug the power cord.
On vacuum cleaners with an electronically actuated
cable rewind, the power cord automatically rewinds
when the machine is unplugged at the socket.
If you do not want the power cord to rewind
completely (e.g. when changing the plug), you can
apply the cable brake by pulling the power cord.
To store or transport the vacuum cleaner, you can use
the parking aid on the cleaner's underside. Place the
vacuum cleaner upright.
Slide the plastic lug on the floor nozzle into the groove
no the unit underside.
To remove the suction hose, press the two lugs
together and pull the hose out.
28
en
When the work is done
*
*
*
To release the connection, press the unlatching sleeve and
pull the handle out.
* Depending on equipment level
To release the connection, press the unlatching sleeve and
pull the telescopic tube out.
* Depending on equipment level
To adjust the length of the telescopic tube, press the
adjusting button/adjusting sleeve in the direction of
the arrow and adjust the tube to the required length.
* Depending on equipment level
en
29