Pump Maintenance Schedule And Checklists - REED M2200 Technical Manual

OPERATION and MAINTENANCE

PUMP MAINTENANCE SCHEDULE AND CHECKLISTS

Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only
as a general guideline given the large amount of variables a unit might be subject to, such as
weather and ambient temperature conditions, jobsite conditions, material differences of mix design,
the load burden the unit is typically subject to, i.e. light, medium or heavy duty operation, etc.
The list that follows is to be used as a reference guide. However, the end user is encouraged to
develop a preventative maintenance program that specifically suites their needs depending on the
usage of the equipment.
DAILY PUMP MAINTENANCE CHECKLIST
Actual Hours
# Maintenance Description
1 Check hydraulic tank fluid levels
2 Check condition of hydraulic oil for water or other contamination.
3 Drain water from hydraulic tank
4 Check engine fluid levels (see engine manufacturer maintenance schedule
for additional requirements)
Additional Notes:
5 Check hydraulic filter indicator condition
6 Lubricate lubrication points, during and after pumping
7 Inspect unit for fluid leaks, loose hoses, loose nuts, bolts, fasteners etc.
Additional Notes:
8 Additional Notes:
Rev *
www.reedpumps.com
(909)287-2100
Date / /
Initials
44 of 51