REED M2200 Technical Manual page 29

OPERATION and MAINTENANCE
OPERATION OF PAN MIXER
SYSTEM START-UP
4. THE ELECTRIC MOTOR MAY BE STARTED FROM THE PLATFORM WITH THE I-O
(START (green)-STOP (red)) PUSH BUTTON SWITCH. BY PUSHING THE GREEN BUTTON.
5. ONCE ELECTRIC MOTOR IS STARTED YOU SHOULD SEE HYDRAULIC PRESSURE
ON THE GADGE.
TURN MIXER SWITCH TO THE "ON" POSITION.
6. MIXER SPEED CAN BE CONTROLED BY ROTORY KNOB.
IN THE CASE OF THE END OF THE DAY OR IF THERE IS A STOP IN PRODUCTION THE
RED BUTTON CAN BE PUSHED TO STOP THE ELECTRIC MOTOR, AS ALWAYS, THE
MIXER MOTOR SHOULD BE STOPED FIRST.
AFTER BLENDING MATERIAL IN MIXER, THERE MAY BE A NEED FOR A SAMPLE OF
THE BLENDED MATIERIAL, IN THIS CASE THE HOPPER GRATE CAN BE RAISED WITH
OUT STOPING THE MOTOR DRIVING THE BLADES FOR A PERIOD OF TIME EQUAL TO
30 SECONDS ONLY! AFTER THAT TIME PERIOD THE MACHINE WILL DEFAULT TO THE
'E' STOP CONDITION.
THE OPPERATOR AND ALL FUNCTIONS INCLUDING THE ELECTRIC MOTOR WILL BE
SHUT OFF. YOU MUST RESTART THE COMPLETE SYSTEM.
DURING THE OPERATION OF THE MACHINE DURING THE DAY, AS LONG AS THE
BLADE MOTOR SWITCH IS IN THE "OFF" POSITION THE HOPPER GRATE CAN BE
LIFTED OPENED WITH OUT THE POSSIBILITY OF 'E' STOP CONDITION ENGAGMENT.
Rev *
5
4
6
www.reedpumps.com
(909)287-2100
28 of 51