REED M2200 Technical Manual page 40

www.reedpumps.com
OPERATION and MAINTENANCE
(909)287-2100
HYDRAULIC SYSTEM
Hydraulic pumps are used to supply the flow of oil necessary to operate actuators of
the Pan Mixer.
Contamination of the Oil Is the Leading Contributor to System Malfunctions
Extreme care must be exercised to prevent contaminants from entering the system.
Always cap or plug open ports and hydraulic lines.
HYDRAULIC TANK
Hydraulic tank can be equipped with an access cover with breather. A sight and
temperature gauge are installed on the tank to determine the fluid level and
temperature inside the tank. The tank is also equipped with drain valve.
To accomplish filtration, hydraulic tanks can be equipped with the following: internal
magnetic suction strainers, a suction filter, a return filter and a pressure filter.
NOTE: Not all models use all these components. Suction and return filters are
equipped with an indicator gauge to monitor filter restriction. An oil cooler is adjacent
to the engine cooling unit.
HYDRAULIC
FILTER
TANK CLEAN
OUT
OIL LEVEL
Rev * 39 of 51