Advertisement
Switchting Mode Selecting
There are three operating modes, which can be selected on the bottom of the stand
base, Push On / Push Off, Momentary On and Momentary Off. (Figure 3)
＊Push On / Push Off:
Switch to "PUSH ON/OFF" mode. Press the On / Off Switch to talk and press again to mute.
＊Momentary On:
Switch to "MOM. ON" mode. Microphone is ON only while the On / Off Switch is being pressed. (Push to Talk)
＊Momentary Off:
Switch to "MOM. OFF" mode. Microphone is OFF only while the On / Off Switch is being pressed. (Push to Mute)
LED Indicator
LED indicator shows the On/Off status . When the LED lights up, the microphone is ON to talk and the power
supply is normal.
Specification
Frequency Response....................
Power Requirement......................
Current Consumption -Stand-by
Current Consumption -Operating
Switches.........................................
Connector.......................................
Net Weight......................................
Dimension (mm)
101.5
ST-5050i
20 ~ 20,000Hz
Phantom power 12-48V or battery power 9V
0.3mA
5mA(BAL) , 0.3mA(UNBAL)
Microphone selection: ECM MIC unbalanced input, ECM MIC balanced input,
Dynamic MIC input
Push control: on/off
Function selection: push on/off, momentary on, momentary off
unbalanced and balanced audio input ( XLR 3P Female)
unbalanced and balanced audio output ( XLR 3P Male)
0.82kg
61.2
33.3
SWITCH MODE
ECM MIC unbalanced
audio input
PUSH ON/OFF
(Power Supply: Battery)
MOM. ON
MOM. OFF
DYNAMIC MIC
Figure 3
59010-080-02
Advertisement
