Samsung AM JXVAF Series Installation Manual page 59

Specification of the protection tube
Name
Flexible PVC conduit
Class 1 flexible conduit
Class 1 PVC coated flexible
conduit
Caution for perforating the knock-out hole
Perforate a knock-out hole by punching it with a
CAUTION
hammer.
After perforating the knock-out hole, apply rust
resisting paint around the hole.
When you need to pass the cables through the knock-
out hole, remove burrs on the hole and protection the
cable with a protection tape or bushing etc.
Caution for installing communication cable
When you connect the cable, it may sag and pressed by
other parts. Therefore cables should be fixed to a clamp
highlighted with a box on the illustration.
Temper grade
PVC
Galvanized steel sheet
Galvanized steel sheet and
Soft PVC compound
Applicable conditions
When the protection tube is installed indoor and not exposed
to outside, because it is embedded in concrete structure
When the protection tube is installed indoor but exposed to
outside so there are risk of damage to the protection tube
When the protection tube is installed outdoor and exposed to
outside so there are risk of damage to the protection tube and
extra waterproof is needed
Path for arranging
external
communication cable
Fixing location
of the external
communication cable
59