Table of Contents
Advertisement
Connecting a Satellite
Receiver to the Hard Disk
Recorder (Using S-Video)
1. Connect the incoming television signal to the IN jack
on your satellite receiver.
2. Connect the red and white Audio plugs of an A/V
cable from the AUDIO OUT jacks on your satellite
receiver to the LINE 2 INPUT jacks on the Hard Disk
Recorder, matching like colors.
3. Connect an S-Video cable from the S-VIDEO OUT
jack on your satellite receiver to the S-VIDEO IN jack
on the Hard Disk Recorder.
4. Connect the red and white Audio plugs of an A/V
cable from the LINE 2 OUTPUT jacks on the Hard
Disk Recorder to the AUDIO IN jacks on your
television, matching like colors.
6. Connect an S-Video cable from the S-VIDEO OUT
jack on the Hard Disk Recorder to the S-VIDEO IN
jack on your television.
7. Attach the satellite receiver controller. See "Satellite
Receiver and Cable Box Controllers" on page 10.
8. Follow the C ~ E instructions on page 9 for telephone
connection, AC power connection, and setup.
NOTES
• Leave the yellow video cable unattached on your satellite
receiver, the Hard Disk Recorder and television.
• Refer to your TV or satellite receiver owner's manual for more
information on connecting to these components.
Connecting a Satellite Receiver
and A/V Receiver to the Hard
Disk Recorder (Using S-Video)
1. Connect the incoming television signal to the IN jack
on your satellite receiver.
2. Connect an A/V cable from the AUDIO OUT jacks on
your satellite receiver to the LINE 2 INPUT jacks on
the Hard Disk Recorder, matching like colors.
3. Connect an S-Video cable from the S-VIDEO OUT
jack on your satellite receiver to the S-VIDEO IN jack
on the Hard Disk Recorder.
4. Connect the Audio cable from the AUDIO OUT jacks
on your A/V receiver to the speakers. Then, connect
the S-Video cable from MONITOR OUT jack on your
A/V receiver to the S-VIDEO IN jack on your
television. (Note: If you do not have separate
speakers, see step 4 on page 12.)
5. Connect an S-Video cable from the S-VIDEO OUT
jack on the Hard Disk Recorder to the S-VIDEO IN
jack on your A/V receiver.
6. Connect an A/V cable from the AUDIO OUT jacks on
the Hard Disk Recorder to the IN jacks on your A/V
receiver, matching like colors.
7. Attach the satellite receiver controller. See "Satellite
Receiver and Cable Box Controllers" on page 10.
8. Follow the C ~ E instructions on page 9 for telephone
connection, AC power connection, and setup.
NOTE
• Refer to your TV, satellite receiver, or A/V receiver owner's
manual for more information on connecting to these components.
PanaHDR P01-.p65
13
VHF/UHF
R
AUDIO
L
VIDEO
IN
IN
Satellite Receiver
IN
R
AUDIO
L
VIDEO
S-VIDEO
SERIAL
Hard Disk Recorder
INPUT
OUTPUT
R
AUDIO
L
VIDEO
R
AUDIO
L
VIDEO
ANT/CATV
1
S-VIDEO
S-VIDEO
IN
IR
SERIAL
IN
OUT
BLASTER
CONTROL
LINE
PORT
2
Satellite Receiver
Hard Disk Recorder
00/12/01, 16:37
TV
S-VIDEO
VHF/UHF IN
VHF/UHF OUT
OR
AC-IN
TEL LINE
TV
OR
A/V Receiver
13
Advertisement
Table of Contents
