Location Of Controls - Panasonic ShowStopper PV-HS3000 Operating Instructions Manual

Location of Controls

Front View of the Hard Disk Recorder
Power LED
Solid green indicates the
Hard Disk Recorder is on.
Rear View of the Hard Disk Recorder
INPUT LINE 1
Audio(L/R)/video input connector
with conventional (composite) video.
ANT/CATV IN
Antenna/Cable
input terminal.
1
ANT/CATV
IN
LINE
2
INPUT LINE 2
Audio(L/R)/video
input connector with
(composite) video.
* Serial and IR controls are used only with Satellite receiver equipment and cable boxes.
Serial control can be used only with a Satellite receiver that has a serial port.
PanaHDR- P42-.p65
RECORDING LED
Lights red when the Hard Disk
Recorder is recording a show.
Power Button
Manually switch between
On and Standby modes.
POWER
OUTPUT LINE 1
Audio(L/R)/video output
connector with conventional
(composite) video.
INPUT OUTPUT
R AUDIO L VIDEO R AUDIO L VIDEO
S-VIDEO S-VIDEO
IN OUT
OUTPUT LINE 2
Audio(L/R)/video
output connector with
(composite) video.
S-VIDEO IN
S-Video input
connector for
LINE2.
57
NEW CONTENT LED
Lights green when the Hard Disk Recorder
has completed recording a show.
RECORDING
NEW CONTENT
SERIAL CONTROL*
Serial port for linking a Satellite
Receiver with a serial port.
S-VIDEO OUT
S-Video output
connector for
LINE2.
IR SERIAL TEL LINE
BLASTER CONTROL
PORT
TEL LINE
Telephone jack
(required) for connecting
to the ReplayTV Service.
IR BLASTER PORT*
Infrared (IR) jack for
controlling a satellite or
cable box with IR control.
00/12/01, 16:41
P V- H S 3 0 0 0
AC IN
AC Power plug
connector.
AC~IN
57