Setting The Tablet 721/721P Bios Supervisor Password; Configuring The Tablet 721/721P Boot Priority For Devices; Exiting The Tablet 721/721P Bios Configuration Utility - Oracle MICROS 700 Series Setup Manual

Table 5-1
Setting
Set Supervisor Password
TPM Availability

Setting the Tablet 721/721P BIOS Supervisor Password

Setting the supervisor password is an important step to secure the Tablet 721/721P.
After setting a supervisor password, the option to set user passwords will appear.
Setting user passwords allows the creation of users with limited access.
Connect a USB keyboard to the tablet, and then power on or restart the
1.
workstation.
Press Esc immediately after pressing the power button and before the BIOS
2.
splash screen. You can press Esc repeatedly until the Configuration Utility starts.
On the BIOS main screen, use the keyboard arrow keys to select the SCU icon,
3.
and then press Enter.
Navigate to the Security tab, select Set Supervisor Password, and then press
4.
Enter.
On the Set Supervisor Password dialog, enter and confirm a password.
5.
Exit and save the changes.
6.

Configuring the Tablet 721/721P Boot Priority for Devices

On the Boot Manager screen, use the arrow keys to reorder the priority list for boot
devices. The BIOS reads the devices from top to bottom in determining the method for
booting into the operating system.
For example, if you want the workstation to boot from a DVD whenever a user inserts
a disc and the HDD installation when there is no operating system disc, make sure to
place the DVD device, such as USB DVD, higher on the list than the HDD with the
operating system installation, such as ATA HDD0.

Exiting the Tablet 721/721P BIOS Configuration Utility

On the Exit tab, select one of the following options:
• Exit Saving Changes: Save the current configuration settings, exit the
configuration utility, and boot into the operating system.
• Save Change Without Exit: Save changes without exiting BIOS.
(Cont.) BIOS Security Settings
Setting the Tablet 721/721P BIOS Supervisor Password
Description of Option
Set or clear the supervisor password. After
setting a supervisor password, the option to
set user passwords will appear. Setting user
passwords allows the creation of users with
limited access.
Enable or Disable Trusted Platform Module
support.
TPM is disabled by default.
Chapter 5
5-2