Inter-Facility Link (Ifl) Cables; Coaxial Cables; Lan Cable - Gilat Satellite Networks SkyEdge II Installation Manual

The VSAT can be in either one of two modes, Boot or Operational. The
configuration parameters can only be modified while the VSAT is in Boot mode.
This ensures that no changes can be made in the basis VSAT configuration
parameters to a VSAT that is live in a network. All changes to such a VSAT will be
made from the NMS.

1.3 Inter-Facility Link (IFL) Cables

1.3.1 Coaxial Cables

The Inter-Facility Link between the ODU and IDU provides a full duplex
communication path between the two units. It consists of two coaxial cables: IFL Tx
and IFL Rx. In general, no line amplification is required for cables less than 50
meters in length. For lengths over 50 meters consult your Gilat representative for
additional information and specifications.

1.3.2 LAN Cable

All of the LAN cables used are type CAT-5. Ethernet hubs or switches are used to
connect multiple PCs to the SkyEdge VSAT. The maximum length of a LAN cable is
100 meters (325 feet).
SE VSAT Install and Monitor
May, 2007
SkyEdge II VSAT Installation and Monitoring
2
Proprietary and Confidential