Figure 21: Start Alignment; Figure 22: Rx Signal Before Alignment - Gilat Satellite Networks SkyEdge II Installation Manual

The device works by reading the outbound signal received by the VSAT. As the
antenna position is adjusted, the strength of the signal is indicated simultaneously in
two different forms:
The optimal angle is achieved when the indicators are at their maximum values.
10. Activate the speaker by clicking on it.
11. Rotate the antenna until the Rx Signal is optimized.
SE VSAT Install and Monitor
May, 2007
Figure 20: Start Alignment
Result: The VSAT restarts in Antenna Alignment mode.
Bar graph with Eb/N0 reading
Audio signal through speaker. The higher the pitch and strength of the sound, the
higher the reading.
Figure 21: Rx Signal before Alignment
Proprietary and Confidential
SkyEdge II VSAT Installation and Monitoring
17