Table of Contents
Advertisement
4. When all of the parameters have been entered, click Submit.
5. Click OK.
2.3 Configuring a VSAT using a File
When multiple VSATs are configured, the changes between them are minimal. In
order to simplify the configuration process, the configuration of one VSAT cab used
for others using the procedure in this section. The parts of the procedure are as
follows:
SE VSAT Install and Monitor
May, 2007
Result: The confirmation message appears (Figure 11).
Figure 11: Confirm Configuration Parameters
Result: The Submit Successful message appears (Figure 12).
Figure 12: Submit Successful
This procedure can only be used with a PC and not with a PDA.
Save the configuration to a PC as a file
Upload the file to the VSAT to be configured
Modify the parameters as necessary (in all cases the VSAT ID must be changed
Proprietary and Confidential
SkyEdge II VSAT Installation and Monitoring
N
OTE
11
Hide quick links:
Advertisement
Table of Contents
