ATEN VS481A User Manual page 8

Components
VS481A Front View
A
No. Component
1 HDMI In
2 Port Selection
Pushbuttons
3 IR Receiver
4 Port LEDs
1
1
Plug the cable from an HDMI source
device into this port (number 4).
Pressing a port selection pushbutton
routes the A/V source from the
corresponding input port to the output port
for display.
This receives signals from the IR remote
control.
There are two port LEDs next to each port
selection pushbutton.

The ON LINE LED (top, orange) lights
up to indicate that the device attached
to the corresponding port is powered
on.

The SELECTED LED (bottom, green)
lights up to indicated that the port is
selected.
2
2 3
4
Function
- 8 -
3
4