Powering Off And Restarting - ATEN VS481A User Manual

Powering Off and Restarting

If you power off the VS481A, follows these steps before powering
it on again:
1. Power off the attached devices.
2. Unplug the power adapter cable from the VS481A.
3. Wait 10 seconds, and then plug the power adapter cable back
in.
4. After the VS481A is powered on, power on the attached
devices.
Note: Whenever the VS481A is powered on, it automatically
selects the A/V source attached to Port 1.
- 17 -