CareCo UNIVERSAL ADJUSTABLE TABLE Quick Start Manual

TO RAISE THE TABLE
Lift the table until the desired height is reached; Lift the table until the desired height is reached;
it will automatically lock in position.
TO LOWER THE TABLE
Squeeze lever handle and table top together
(with one hand) and apply pressure down above
the column until the table top lowers to the
desired position. Release the lever and the table
top is locked.
NOTES NOTES
Occasional application of light oil lubrication
between the inner and outer columns will
help your table operating smoothly.
The table top will rotate a full 360°around its base
to be used as a side table or lap tray as needed.
THIS TABLE IS DESIGNED TO BE
USED WITH HEAVIER RECLINER
CHAIRS SO INCORRECT USE OR CHAIRS SO INCORRECT USE OR
POSITIONING MAY RESULT IN
THE TABLE TIPPING OVER.
(REF. ASSEMBLY STEP 1)
CAUTION--SPRING LOADED ASSEMBLY
Do not remove the black shipping screw
before completing assembly steps 1-4.
Removing the shipping screw before this Removing the shipping screw before this
can result in personal injury and spring
damage.
Product is NOT to be used to assist in lifting
or hold more than 25lbs (11kgs).
With hand squeezing the lever and table top
Plastic lever
CareCo (UK) Ltd
Hubert Road
Brentwood
Essex
CM14 4JE
Tel: 0800 111 4774
Email: sales@careco.co.uk
www:careco.co.uk
UNIVERSAL ADJUSTABLE TABLE