Advertisement

Quick Links

Scan me on your
phone camera
to watch our
assembly video.
USER MANUAL
PRODUCT CODE: FN01010006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CASTELLO FN01010006 and is the answer not in the manual?

Questions and answers

Summary of Contents for CareCo CASTELLO FN01010006

  • Page 1 Scan me on your phone camera to watch our assembly video. USER MANUAL PRODUCT CODE: FN01010006...
  • Page 2 Castello Riser Recliner, ensuring you’ll be able to enjoy all of its features for years to come. If any additional assembly, disassembly and/or operation assistance is required, please contact CareCo. CareCo (UK) Limited, 1 Turing Court, Tel: 0333 015 5000 Great Notley, Braintree, CM77 7AT www.CareCo.co.uk Thank you for choosing CareCo.
  • Page 3 KEY DEFINITIONS This user manual contains warnings and suggestions marked with the following symbols: WARNING! Highlights a potentially hazardous condition/situation for the user and/or product. SUGGESTION General suggestions and advice for operating the product. Need help with assembly? We’ve put together a step-by-step assembly guide to help you get your product set up safely and correctly.
  • Page 4: Table Of Contents

    FN01010006 PRODUCT CODE CONTENTS GETTING STARTED CARTON CONTENTS PRODUCT COMPONENTS SETTING UP YOUR RISER RECLINER HOW TO USE YOUR RISER RECLINER USER INSTRUCTIONS RISE & RECLINE HANDSET CONTROLS TRANSFORMER BATTERY BACK-UP COMFORT ADJUSTMENTS OPTIONAL EXTRAS DISASSEMBLY & TRANSPORTATION DISASSEMBLY INSTRUCTIONS TRANSPORTATION LOOKING AFTER YOUR RISER RECLINER FABRIC UPHOLSTERY CARE...
  • Page 5 TROUBLESHOOTING WARNINGS & TECHNICAL INFORMATION SPECIFICATIONS ELECTROMAGNETIC INTERFERENCE (EMI) PRODUCT RE-ISSUING RECYCLING & DISPOSAL INTENDED USE INTENDED ENVIRONMENT PRODUCT IDENTIFICATION / SERIAL NUMBER MODIFICATIONS GENERAL WARNINGS EXPECTED LIFETIME WARRANTY NOTES...
  • Page 6: Getting Started

    FN01010006 PRODUCT CODE GETTING STARTED CARTON CONTENTS ITEM NUMBER DESCRIPTION QUANTITY Contact CareCo immediately if SEAT BASE any of the listed contents are BACKREST missing. HEADREST CUSHION We strongly recommend that LUMBAR CUSHION you keep the box and internal RISE & RECLINE HANDSET...
  • Page 7: Setting Up Your Riser Recliner

    SETTING UP YOUR RISER RECLINER 1. Remove all riser recliner components 2. Lift the power cable away from the seat from the outer packaging and place them base prong and place to one side. onto a level surface. 3. Attach the lumbar cushion to the backrest. 4. Attach the headrest cushion to the backrest.
  • Page 8 FN01010006 PRODUCT CODE 5. Lower the backrest onto the seat base 6. Move the chair into a suitable position prongs, then firmly push downwards. with plenty of space to rise and recline. An audible “click” will confirm the backrest is secure. 7.
  • Page 9: How To Use Your Riser Recliner

    HOW TO USE YOUR RISER RECLINER USER INSTRUCTIONS CHAIR POSITIONING Position the chair on a level surface with enough space to rise & recline. SUGGESTION If required, ask for assistance from an attendant when positioning the chair to avoid personal injury and product damage. SITTING DOWN Ensure the riser recliner chair’s backrest is in the upwards position and the footrest is in the downwards position.
  • Page 10: Rise & Recline Handset Controls

    FN01010006 PRODUCT CODE RISE & RECLINE HANDSET CONTROLS Press the appropriate button to complete the desired action: 1. Raises Chair (Lowers footrest, raises backrest, raises chair) 2. Reclines Chair (Raises footrest, reclines backrest, lowers chair) TRANSFORMER The riser recliner chair transformer is fitted with an LED indicator that indicates when the power is [ON] and when the power is [OFF].
  • Page 11: Battery Back-Up

    BATTERY BACK-UP Optional 9V batteries can be installed into the transformer which will activate during a power failure. The riser recliner chair will automatically use the battery backup and run for one cycle, allowing the user to leave the chair or return the chair to its original position. INSTALLING THE BACK-UP BATTERY Requirements: 2 x 9V Batteries...
  • Page 12: Comfort Adjustments

    FN01010006 PRODUCT CODE COMFORT ADJUSTMENTS The Castello Riser Recliner features a removable headrest and lumbar cushion, allowing the user to manually adjust the chair to their individual needs. HEADREST CUSHION 1. Lift the headrest cushion away from the 2. Reseat the headrest cushion in the backrest.
  • Page 13: Optional Extras

    Protect your riser recliner with additional armrest and headrest covers. WATERPROOF CHAIR PROTECTOR Protect your riser recliner from leaks and spillages with the waterproof chair protector. CARECO FABRIC CARE KIT Remove stubborn stains and odours with the CareCo Fabric Care Kit.
  • Page 14: Disassembly & Transportation

    FN01010006 PRODUCT CODE DISASSEMBLY & TRANSPORTATION DISASSEMBLY INSTRUCTIONS 1. Disconnect the chair from the wall socket, 2. Release the locking clips on either side of then place the transformer and power the backrest while pulling the backrest cable into the side pocket. upwards.
  • Page 15: Transportation

    (Optional) Lift the lumbar cushion away from 4. Place the disassembled components the backrest. together, ready for transport. TRANSPORTATION If for any reason the riser recliner chair needs to be transported via motor vehicle, ensure the disassembled components are properly secured before transport to avoid transit damage.
  • Page 16: Looking After Your Riser Recliner

    FN01010006 PRODUCT CODE LOOKING AFTER YOUR RISER RECLINER WARNING! Personal injury or fire damage can occur if the chair comes into direct contact with a heat source. (e.g., cigarette, heater) We recommend that the user does not smoke whilst using the riser recliner chair however if the user wishes to do so, please adhere to the following safety guidelines: •...
  • Page 17: Scissor Mechanism Care

    Ensure that the area around the scissor mechanism is clear of obstacles that could affect its movement, including cables and other items. If there are unusual grinding noises, jerky movements, or persistent problems with the recliner’s scissor mechanism, contact CareCo. Do not exceed the weight limit specified. ELECTRONICS CARE Check for damage regularly following the maintenance schedule found within this user manual.
  • Page 18: Maintenance

    Certain riser recliner components can be repaired by the user with guidance provided by CareCo. Other components can only be repaired/replaced by a service technician. If for any reason the riser recliner requires repair due to a defect, contact CareCo immediately.
  • Page 19 TROUBLESHOOTING The below table is to be used as a guide to make the recliner chair operational again. If after troubleshooting the recliner chair still does not operate, contact CareCo. SYMPTOM POSSIBLE CAUSE POSSIBLE REMEDY Check for any loose connections and tighten if required.
  • Page 20 FN01010006 PRODUCT CODE WARNINGS & TECHNICAL INFORMATION SPECIFICATIONS Max user weight (kg) Net weight (kg) Gross weight (kg) Chair width (cm) Chair depth (cm) Chair height (cm) Seat width (cm) Seat depth (cm) Seat height (cm) Back width (cm) Back height (cm) Recline depth (cm) Recline height (cm) Filling...
  • Page 21 ELECTROMAGNETIC INTERFERENCE (EMI) Riser Recliner chairs may be susceptible to electromagnetic interference (EMI). Electromagnetic energy (EM) is emitted from sources such a radio stations, TV stations, amateur radio (HAM) transmitters, two-way radios, and cellular phones. The interference (from radio wave sources) can cause the riser recliner to move by itself or cause permanent damage to the riser recliner’s internals.
  • Page 22 RECYCLING & DISPOSAL When disposing of the riser recliner and/or its components, users should follow local disposal/ recycling regulations. Contact CareCo if further advice is needed regarding recycling & disposal. INTENDED USE To assist an individual when sitting, standing, and resting.
  • Page 23 GENERAL WARNINGS • Plug the power lead directly into a wall outlet. Avoid using extension leads. • Do not disconnect the plug from the wall outlet by pulling the power cable. • Periodically check the handset and power leads for visible damage. •...
  • Page 24 FN01010006 PRODUCT CODE EXPECTED LIFETIME The Expected Lifetime is the estimated period of time for which the riser recliner is expected to function according to its intended use. Various items such as weight capacity, user behaviour, and intensity of use can affect the expected lifetime.
  • Page 25 Parts that have been purchased by the end user after the original warranty period has expired have a warranty period of 12 months. CareCo is not responsible if the riser recliner requires repair or replacement as a direct result of: •...
  • Page 26 FN01010006 PRODUCT CODE NOTES...

Table of Contents