Chapter 3 Replacement Procedure - Pro-face GP4100 Series Replacement Manualbook

Chapter 3 Replacement Procedure

3.1 Work Flow
Installation
Check the compatibility of
hardware in Chapter 2.
Remove GP4100
(Monochrome).
Install GP4100 (Color)
Connect the power cord.
Check the performance
and start operation.
*1: This step is required if screen data is saved only in the GP unit, not in any other device.
Screen
Receive screen data from
GP4100 (Monochrome).*1
Change the received data
on GP-Pro EX.
Check and modify the data
on GP-Pro EX.
Transfer the screen data to
GP4100 (Color).
12/25
Communication
Check the connection
between GP4100 (Color)
and a PLC in the GP-Pro EX
Device/PLC Connection
Manual.
Connect GP4100 (Color)
and PLC with the PLC's
cable.
Start connection and check
the communication.