GE AF-600 FP Metasys Operating Instructions Manual page 9

2.1.6 General Commands (Acknowledged)
DRIVE Response Command
2
ACK 0
ACK 0
ACK 0
ACK F
ACK 0
ACK, no action 8
ACK, no action 8
ACK, no action 8
ACK, no action 8
ACK, no action 9
ACK, no action 9
ACK, no action 9
ACK, no action 9
NAK 0
NAK 0
Table 2.1: No Region, Attribute Number and -type in this table.
8
NPA Object
Subcommand Attribute Message Type
no.
4 -
No Acknowledge
5 -
With Acknowledge
9 - Status update Message
- - Identify Device Type
0 -
0 -
1 -
3 - Upload Record
4 - Upload Complete
0 -
1 -
3 -
4 - Download Complete
1 - Read Memory
8 -
Error Code
The slave is to respond with any data points,
Poll Message
- analog or binary I/O that have been flagged
The slave is to respond with any data points,
Poll message
- analog or binary I/O that have been flagged
Slave device must respond with device man-
- ufacturing model number (Par. AN-21), days in
Slave device responds with an identification
-
number of 10H to indicate non JCI device
The internal clock is syncronized by this com-
Synch Time -
Upload -
Upload -
-
-
Download -
Download -
Record optional, no support in the frequency
Download -
-
Slave device memory read based on memory
01
Warm Start 01
AF-600 FP Metasys
Comments
for COS
for COS
service (Par. AN-00) and device status
mand
Optional, no support in the frequency
converter
Optional, no support in the frequency
converter
Optional, no support in the frequency
converter
Optional, no support in the frequency
converter
Optional, no support in the frequency
converter
Optional, no support in the frequency
converter
converter
Optional, no support in the frequency
converter
addresses
JCI use only