GE AF-600 FP Metasys Operating Instructions Manual page 13

2.1.10 Analog Output Commands (Not Acknowledged)
DRIVE Command
Response
2
0-2 1
NAK 1
NAK 2
NAK 2
NAK 2
NAK 2
1)
Table 2.5: No Subcommand coloumn in this table.
12
Region NPA Object no. Attribute No.
3 0-2 4
3 0-2 5
3 0-2 2
3 0-2 3
3 0-2 4
3 0-2 5
Error code 11 is used because attributes are considered as fields/records in the point map database.
Attribute Message Type Error
Code
Float Read Analog Output 11 1
Float Read Analog Output 1
11
Byte Write Analog Out-
11 1
put
Float Write Analog Out- 1
11
put
Float Write Analog Out- 11 1
put
Float Write Analog Out- 1
11
put
AF-600 FP Metasys
Comments
Read Low Linear Ranging Parameter
attribute associated with each
individual point. (JCI use only)
Read High Linear Ranging Para-
meter attribute associated with
each individual point. (JCI use only)
Object Status not writeable
Write to Current Value structure at-
tributes associated with each
individual point. (N2 does not sup-
port this, override function must be
used)
Write Debouncing Value in msec at-
tribute associated with each
individual point.(JCI use only)
Write Accumulator value attribute
associated with each individual
point. (JCI use only)