GE AF-600 FP Metasys Operating Instructions Manual page 12

2.1.9 Analog Output Commands (Acknowledged)
DRIVE Command Sub
Response command
ACK 1 -
ACK 1 -
ACK 0 9
ACK 1 -
ACK 2 -
ACK 7 2
ACK 7 2
ACK 7 3
ACK, no action 7 7
ACK, no action 7 8
Table 2.4: No Error Code coloumn in this table.
Region NPA Object no. Attribute No.
3 0-2 1
3 0-2 2
- - -
3 0-2 3
3 0-2 1
3 0-2 -
3 0-2 -
3 0-2 -
3 0-2 -
3 0-2 -
Attribute Message Type
Byte Read Analog Output Read Object Configuration attrib-
ute associated with each
Byte Read Analog Output Read Object Status attribute asso-
ciated with each individual point
- Status update Mes- Slave device must respond with
sage device manufacturing model
number (Par. AN-21), days in ser-
vice (Par. AN-00) and device status
Float Read Analog Output Read Current Value attribute asso-
ciated with each individual point
Byte Write Analog Output Write to Object Configuration at-
tribute associated with each
Float Override Analog Out- Write to analog output current
put value (frequency setpoint)
Float Override Analog Out- Write to analog output current
put value (frequency setpoint)
- Override Release Set the current value, the value
that it was before the 1. Override
Command was issued
- Write Analog Output Optional command for slave devi-
ces. Only used for N2 Attributes
commissioning purposes. Not to
be implemented at this time
- Read Analog Output Optional command for no action
Attributes slave devices. Only used for N2
commissioning purposes. Not to
be implemented at this time
AF-600 FP Metasys
Comments
2
individual point
individual point
11