Arrowstik Emergency Mode Operation; To Toggle Arrowstik Emergency On Or Off; Takedown, Work And Alley Light Flash Pattern Selection; Secondary Takedown, Work & Alley Light Function Options - Ecco 21 Series Installation And Operation Instructions Manual

Multicolor lightbars
Table of Contents

Advertisement

Arrowstik Emergency Mode Operation

ArrowStik Emergency Mode adds an alternating double flash sequence of the primary LEDS after the Arrowstik sequence cycles four times.
The lightbar will come from the factory, with the ArrowStik Emergency function disabled.
This option is only available for lightbars with multicolor modules in the Arrowstik. Please note that this function does not work with the
FLASH function.

To toggle ArrowStik Emergency on or off:

1. Power-up the lightbar. Apply +power to a single ArrowStik function - LEFT (RED), RIGHT (ORG) or CENTER-OUT (RED + ORG).
2. Touch the BLK/RED and BLU/WHT wires to +power to toggle the ArrowStik Emergency function on and off.

Takedown, Work and Alley Light Flash Pattern Selection

The default flash rate for Takedown and Alley Light Wig/Wag Flash is Medium Single 115 FPM. When selecting a flash rate for the Takedown/
Work Light or Alley Light Modes,
1. Power-up the lightbar and apply +power to the Takedown Flash Mode (BLK) or the Alley Flash Mode (BLU/WHT). Programming will not
work if more than one function is selected.
2. Touch the Pattern Select wire (BLK/RED) to +power to cycle through the flash patterns shown in Table 16. Hold for longer than 4 seconds
to return to the factory default setting.
Secondary Cruise, Takedown, Work and Alley Light Flash Pattern Selection
In addition to the standard functions listed in Table 1, the secondary LEDs (see Table 4) in multicolor modules in the front, rear and/or corner
positions can be utilized to function in secondary cruise, takedown, alley and work light modes for increased light output and visibility.
Takedown, Work & Alley Light Flash Patterns
Flash Patterns
1
2
3
4
5
6
7
8
9
10
11
12
TABLE 16
Secondary Takedown, Work & Alley Light Function Options
Function Wire Color
GRN/WHT or ORG/BLK
BLU/BLK
RED/WHT
BLK/WHT
GRN
TABLE 17
Flash Pattern
Medium Single 115 FPM
Slow Single 60 FPM
Fast Double 115 FPM
Slow Double 60 FPM
Fast Six 80 FPM
Slow Six 60 FPM
Variable Rate – Single
NFPA Quad 75 FPM
Cycle Flash
Fast Quad 80 FPM
Slow Quad 60 FPM
Fast Single 375 FPM
Function Option
Secondary Takedown Light Mode
Secondary Work Light Mode
Secondary Right Alley Light Mode
Secondary Left Alley Light Mode
Secondary Cruise Mode
Page 14 of 20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents