Siemens DMS8000 MP4.30 Connectivity Manual page 17

Configuring SiPass Access Control System
Building Technologies
Fire Safety & Security Products
 If the SiPass server does not run on the same PC as MM8000, then specific
installation steps are required on the networked PC where SiPass is installed:
1) In the Windows user list, the SiPass PC should include the MM8000 Internal
User, by default DMS8000_Proc. Use the same username and password as on
the MM8000 PC. Refer to MM8000 ICC Manual (doc.no.A6V10062413_a_en).
2) In the SiPass Server Properties, modify the Logon option in order to use the
MM8000 Internal User as Logon account.
Perform the following steps:
1. Log on to the PC with the SiPass server.
2. Right-click on My Computer and select:
System Tools → Local User and Groups → Users
3. Add the new user DMS8000_PROC and assign administrator rights
(for detailed instructions, please refer to the Windows documentation).
4. Right-click again on My Computer and select:
Services and Applications → Services
5. Double-click on the SiPass service and select the Log On tab.
048_DMS_DMS8000_Connectivity_Access_Control_MP4.30_A6V10062451_a_en
15
06.2010