Siemens DMS8000 MP4.30 Connectivity Manual page 5

Introduction
Building Technologies
Fire Safety & Security Products
Operational and safety regulations
Before beginning work on the DMS8000 systems, you must have read and un-
derstood the related documents, in particular the Safety Regulations included in
the Installation, Configuration, and Commissioning manual (ICC) for each specific
product.
Liability disclaimer for damage or injuries
Before products are delivered, they are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused
by the incorrect application of the instructions, or the disregard of danger adviso-
ries. This disclaimer applies in particular to personal injuries or damage caused by:
 Improper and/or incorrect use.
 Disregard of safety instructions in the documentation or on the product.
 Poor maintenance or a lack of maintenance.
We have checked the contents of this manual for agreement with the hardware and
software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly
and any necessary corrections included in subsequent editions. Suggestions for
improvement are welcome.
Modification index
Version Date
A6V10062451_a_en 06.2010 Corresponds with DMS8000 MP4.30
A6V10062451_a_en 06.2009 Corresponds with DMS8000 MP4.20
A6V10062451_a_en 06.2008 Corresponds with DMS8000 MP4.15
A6V10062451_a_en 06.2007 Corresponds with DMS8000 MP4.10
009424_b_en 06.2006 Corresponds with DMS8000 MP3.20
048_DMS_DMS8000_Connectivity_Access_Control_MP4.30_A6V10062451_a_en
Notes
3
06.2010