Siemens DMS8000 MP4.30 Connectivity Manual page 9

Configuring SiPass Access Control System
Building Technologies
Fire Safety & Security Products
Fig. 2 Adding the SiPass subsystem
Linking the SiPass subsystem to the SiPass Driver
You have now to link the subsystem to the Driver.
1. Select the SiPass subsystem node.
2. Drag and drop it on the SiPass Driver (Fig. 3).
A new link node appears.
Fig. 3 Linking the SiPass subsystem
Setting the SiPass server address
In this step, you have to specify the network name or address of the SiPass server.
1. Select the SiPass Subsystem node.
2. Select the Node tab.
Note: Here you can customise the node name in the Description field.
3. In the Computer Name field, enter the IP address of the SiPass server PC.
There are two possible cases:
 The SiPass server is the same as for MM8000/MK8000. In this case, the de-
fault IP address 127.0.0.1 is valid in any case.
 The SiPass server is another PC on the network. If so, enter the IP address
or the PC name.
048_DMS_DMS8000_Connectivity_Access_Control_MP4.30_A6V10062451_a_en
7
06.2010