Page 2
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) Read the manual carefully before starting, using or maintaining the machine. Pay special attention to advice and warning regarding safety. The electric command box may only be handled by qualified authorised personnel.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) INDEX INTRODUCTION – GENERAL INFORMATION ....................4 PURPOSE OF THE MANUAL ......................... 4 THE MANUFACTURER ..........................5 ...
Page 4
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) 7.2.2 ADJUSTING THE TENSION OF THE BELT ....................18 CLEANING THE MACHINE .......................... 19 7.3.1 WASHING THE EXTERIOR OF THE MACHINE ..................19 ...
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) INTRODUCTION – GENERAL INFORMATION PURPOSE OF THE MANUAL These instructions are written by the manufacturer and come with the machine. The given information is intended for technically qualified experts.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) THE MANUFACTURER ŠRAML d.o.o. Podnanos 66b 5272 Podnanos SLOVENIA Tel. 00386 36 5 368 6116 Fax 00386 36 5 368 6117 E-mail: info@niko-si.si www.niko-si.si THE IDENTIFICATION OF THE MACHINE The basic data of your sorting conveyor are indicated on the identification label on the casing of the electric command box.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) THE DESCRIPTION OF THE MACHINE THE PURPOSE The sorting conveyor is designed for one purpose only, sorting – removing manually poor-quality fruits - and transporting fruit.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) TECHNICAL DATA WORK AREA The machine can be used and operated by two persons. The work area may change according to the layout and disposition of the machine.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) SAFETY SAFETY ELEMENTS Emergency stop switch (*) The Emergency stop switch interrupts the functioning of the whole fruit processing line when pushed. (*) It is located at the central command box (fruit processing line).
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) The machine can be operated only by qualified personnel in a proper physical and mental state. A person that is under the influence of alcohol, drugs or similar is not allowed to operate the machine, perform washing or maintenance work.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) SAFETY DURING CLEANING AND MAINTENANCE – THE PROCEDURE OF ISOLATION OF THE MACHINE Before starting any maintenance works on the machine it is necessary to: unplug the machine, turn the main switch into position 0.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) TRANSPORT, MOUNTING AND INSTALLATION The machine is transported with a lorry. It is made and delivered as one. LIFTING The manipulation of the lifted cargo is allowed to qualified personnel only! The retention under the elevated cargo is strictly prohibited! During loading and unloading avoid impacts of the cargo.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) COMMANDS OVERVIEW OF COMMAND ELEMENTS – CENTRAL COMMAND BOX 5.1.1 CENTRAL COMMAND BOX (FRUIT PROCESSING LINE) If working with a processing line, the machines are operated from the central command box. The number of sorting conveyors and disposition may differ according to the layout and type of fruit processing line.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) 4) MAIN SWITCH: By turning the switch to position »O«, the power supply is interrupted. By turning the switch to position »|«, the processing line activates.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) 5.1.4 DESCRIPTION AND FUNCTIONS OF THE CONTROL PANEL ELEMENTS The central command box controls the operation of the entire processing line; therefore some actions performed will affect most of the machines that conform the processing line.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) STARTING AND STOPPING THE MACHINE STARTING THE MACHINE Before starting the machine check all the conditions for a safe functioning: check that there are no objects on the machine, which could block normal functioning,...
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) 6.2.2 SHUTDOWN IN CASE OF EMERGENCY A shutdown in case of emergency is possible by pressing the Emergency STOP switch on the control panel. It is possible to continue operating after having reset the safety switch.
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) SORTING/TRANSPORTING PROCESS The sorting process begins by placing fruits/vegetables on the belt. Activate the machine (see section 6.1 for a description of the procedure). Select the desired function mode and start the conveyor/processing line (see section 7.1 for more information about the working modes).
Page 19
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) 7.2.2 ADJUSTING THE TENSION OF THE BELT The tension of the belt is set by the manufacturer but it can be modified if ever needed.
Page 20
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) CLEANING THE MACHINE 7.3.1 WASHING THE EXTERIOR OF THE MACHINE ATTENTION! It is necessary to isolate the machine during any maintenance work: unplug the machine, turn the main switch to position 0.
Page 21
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) WIRING DIAGRAM (PROCESSING LINE) www.niko-si.si NIKO - Fruit processing machinery...
Page 22
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) www.niko-si.si NIKO - Fruit processing machinery...
Page 23
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) www.niko-si.si NIKO - Fruit processing machinery...
Page 24
USER MANUAL – Sorting conveyor – All models (JT1500 / JT2300 / JT3000 / BC2) www.niko-si.si NIKO - Fruit processing machinery...
Need help?
Do you have a question about the JT1500 and is the answer not in the manual?
Questions and answers