Fan Speed; Timer / Preset - Dimplex DCMIST25 Instruction Manual

Functions
Before first use, remove any packaging and tape
stuck on the unit.
ON/OFF
After connecting the cord to a power outlet press the
ON/OFF button to turn the unit ON. To turn the unit
OFF press this button again.

FAN SPEED

The unit has 4 FAN SPEEDS and is adjusted from the lowest speed to the highest
speed. The selected fan speed LED indicator light will illuminate according to the
FAN SPEED selected.
ROTATION
Press the ROTATION button to activate 360 degree rotation. The ROTATION LED
indicator light will illuminate. Press the button again to turn off the function.
MODE
The unit has 3 different modes, as described below, and the default mode after
turning ON is normal. Press the MODE button to select modes in this sequence:
normal > natural > sleep. The MODE indicator light will illuminate accordingly.
Normal: Constant wind speed.
Natural: Changing wind speeds to simulate natural wind.
Sleep: Changing wind speeds to simulate natural wind, however the unit will
automatically turn off after 8 hours.

TIMER / PRESET

The auto-off TIMER can be set in 1 hour increments up to a maximum of 8 hours.
Press the TIMER button while the unit is ON until the desired time is shown on the
LED indicators on the display panel. The unit will automatically turn OFF.
To activate the PRESET mode, press the button while the unit is in Standby mode,
and the unit will be set to turn ON after the PRESET time is complete. The PRESET
time will show on the indicator lights.
8
Paper
tube