Qualification Of Personnel; General Safety Instructions; Product- And Technology-Dependent Safety Instructions; Protection From Electric Voltage - Bosch Rexroth IndraDyn S MS2N Operating Instructions Manual

MS2N Synchronous Motors

2.4 Qualification of personnel

For the purpose of this manual, qualified personnel means persons who are fa-
miliar with transporting, installing, mounting, commissioning and operating the
components of the electrical drive and control system and the associated haz-
ards and have an appropriate qualification for their job.
All persons working on, with or in the vicinity of an electrical system must be in-
formed of the relevant safety requirements, safety guidelines and internal in-
structions (EN 50110-1).

2.5 General safety instructions

Do not install or operate motors or components of the electric drive and control
system before you have not carefully read all delivered documents.
Please observe the particular applicable national, local and system-specific regu-
lations, the safety instructions in the documentation and the warning and infor-
mative labels on the motors.
Improper use of the motors and failure to follow the safety instructions in this
document may result in material damage, personal injury, electric shock or, in
extreme cases, to death!
In the case of damage due to non-observance of the safety notes, Bosch Rexroth
assumes no liability.
Applications for functional safety are only allowed if the motors have the SI-sign
on the rating plate.

2.6 Product- and technology-dependent safety instructions

2.6.1 Protection from electric voltage

Work required on the electric system may only be carried out by skilled electri-
cians. Tools for electricians (VDE tools) are absolutely necessary.
Before working:
1. Enable.
2. Secure against reactivation.
3. Ensure de-energization.
4. Ground and short-circuit.
5. Cover or shield any adjacent live parts.
After completing the job, cancel the measures in reverse order.
Dangerous voltage occurs during operation! Danger to life, risk of injury by elec-
tric shock!
Before start-up, connect the protective conductors on all electric components
●
according to the connection plan.
DOK-MOTOR*-MS2N*******-IT03-EN-P
Bosch Rexroth AG
Safety instructions
5/95