Table of Contents
Advertisement
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
•
Optics & Digital Imaging Division 145-3, Sangdaewon 1-Dong,
Jungwon-Gu, Sungnam, Kyungki-Do, Korea 462-703
TEL : 82-31-740-8137~41 FAX: 82-31-740-8145
SAMSUNG OPTO-ELECTRONICS UK LTD (SOUK)
•
Samsung House, 1000 Hillswood Drive Hillswood Business
Park Chertsey Surrey KT16 OPS
TEL : 44-(0)1932-45-5308
FAX: 44-(0)1932-45-5325
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS AMERICA, INC. (SOA)
•
Closed Circuit Division 40 Seaview Drive, Secaucus N.J 07094,
U.S.A
TEL : (201) 902-0347 FAX: (201) 902-0429
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD (TSOE)
•
7 Pingchang Rd, Nankai Dist, Tianjin, P.R China
Post Code : 300190
TEL : 86-22-2761-9698 FAX: 86-22-2761-6514
P/No. : Z6806-0541-01A
VAN 04. 12
HIGH SENSITIVITY COLOR CAMERA
INSTRUCTION MANUAL
SHC-730N/P
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
SAMSUNG CCD CAMERA
Advertisement
Table of Contents
Related Manuals for Samsung SHC-730N/P
Summary of Contents for Samsung SHC-730N/P
-
Page 1: Instruction Manual
SAMSUNG OPTO-ELECTRONICS UK LTD (SOUK) TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD (TSOE) • • Samsung House, 1000 Hillswood Drive Hillswood Business 7 Pingchang Rd, Nankai Dist, Tianjin, P.R China Park Chertsey Surrey KT16 OPS Post Code : 300190 TEL : 44-(0)1932-45-5308... - Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- Page 3 So It always shows obvious, clear and perfect get the effective surveillance. light contrast picture in any environment. VIDEO/DC Lens Selectable SSNR(Samsung Super Noise The camera accepts 2 types of auto iris Reduction) lenses (DC type/VIDEO type) and is set with the VIDEO/DC selection switch.
-
Page 4: Table Of Contents
Contents Precautions Composition Name and Function of Each Part Front Side Bottom Back Connection Lens • Installing Auto Iris Lens • Installing C/CS-Mount Lens Connecting to Monitor Connecting to Power COLOR CCD CAMERA User’s Manual Operating Your Camera Configuration of The Menu Setting Up The Menu •... -
Page 5: Precautions
Precautions Do not install the camera in Do not install or use the camera in an extreme temperature conditions. environment where the humidity is high. Only use the camera under conditions It can cause the image quality to be poor. where temperatures are between -10˚C and +50˚C. -
Page 6: Composition
Composition 1. High Sensitivity Color Camera 2. Auto Iris Lens Plug 3. Remote Plug 4. C-Mount Adapter 5. Instruction Manual COLOR CCD CAMERA User’s Manual Name and Function of Each Section Front C-Mount Lens Adapter Used to attach C-mount lens. Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting... -
Page 7: Side
Name and Function of Each Section Side BACK FOCUS ADJUSTMENT LEVER When you don’t obtain focused point after adjusting lens focus, adjust the lever. Auto Iris Lens Connector Used to connect Auto Iris Lens plug. DC/VIDEO Selection Switch Used to choose DC or VIDEO according to the type of your Auto Iris Lens. -
Page 8: Back
Name and Function of Each Section Back Video Output Jack Used to connect an external video monitor in jack. Used to connect a remoteplug. D&N Used to input Day & Night Control Signal MD Output Terminal Used to output motion detection signal. Frame Ground AC / DC Power Terminal Used to connect an AC 24V or DC 12V power source. -
Page 9: Installing C/Cs-Mount Lens
Connection 3. Remove the cover from the iris lens plug supplied, and solder the lens cable to the plug as shown below. • Video type : • DC type : No. 1 Pin --- Red (Power source) No. 1 Pin --- Damping - No. -
Page 10: Connecting To Monitor
Connection • Mounting a C-Mount lens 1. Attach the C-Mount lens adapter by turning clockwise. 2. Attach the lens to the camera by turning clockwise. COLOR CCD CAMERA User’s Manual Connecting to Monitor Connect the VIDEO Out jack to the monitor VIDEO In jack. CCD Camera •... -
Page 11: Connecting To Power
• The wire is polarized. Be sure to connect the wire that white line is on covering to ‘-’ terminal and connect the other one to ‘+’ terminal. • Use AC 24V/500mA or DC 12V/500mA power source for SHC-730N/P Resistance of copper wire [at 20C˚ (68˚F)] Copper wire size (AWG) #24(0.22mm... -
Page 12: Setting Up The Menu
Operating Your Camera Setting Up The Menu Use the five Setup Menu buttons on side of the camera. UP button LEFT button SET button RIGHT button DOWN button 1. Press the SET button to access the setup mode. • Setup menu is displayed on the monitor screen. SETUP CAMERA ID BACKLIGHT... - Page 13 Operating Your Camera 3. Press SET button. Camera ID A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n o p q r s t u v w x y z 1 2 3 4 5 6 7 8 9 CLR POS END...
-
Page 14: Backlight
Operating Your Camera Backlight SV-III DSP chip built-in provides intelligent light level control to overcome the severe Backlight conditions. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘Backlight’ using the UP or DOWN button. SETUP CAMERA ID BACKLIGHT... -
Page 15: Motion Detection
Operating Your Camera AWC(Auto White balance Control): The white balance is automatically adjusted in a specific environment. In order to obtain the best result, press the SET button while the camera focuses on white paper. If the environment including the light source is changed, you have to adjust the white balance again. -
Page 16: Lens Selection
Operating Your Camera · When completed, press END button. Notes Tips on Using the Motion Detection Feature • After selecting zone and sensitivity, perform a test operation to make sure it works properly. • If the lighting flickers, the motion detection feature might not work properly. •... -
Page 17: Shutter Speed Control
Operating Your Camera Manual: When using manual lens Notes • When the auto iris lens is mounted, you have to set the DC/Video selection switch on the side of the camera properly according to the type of the lens. The setup window displays DC or Video according to status of this selection switch. -
Page 18: Agc
Operating Your Camera AGC (Auto Gain Control) To get brighter picture. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘GAIN’ using the UP or DOWN button. 2. Set ‘gain’ to desired mode using the LEFT or RIGHT mode. HIGH: Gain is increased or decreased from 0 to 34dB automatically as following the illumination. -
Page 19: Ssnr
Operating Your Camera SSNR(Samsung Super Noise Reduction) To reduce the noise on the screen. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SSNR’ using the UP or DOWN button. 2. Set ‘SSNR’ to desired mode using the LEFT or RIGHT mode. - Page 20 Operating Your Camera PRIVACY: To mask area which you want to mask - OFF: Deactivation - ON: Privacy mode activated · Press the SET button. · 4 AREAS are selectable. Select the area you want(AREA1, AREA2, AREA3, AREA4) · Set AREA STATE ‘ON’ using LEFT or RIGHT button. ·...
-
Page 21: Using Reomte Jack / Md Output / D&N Input
Operating Your Camera IMAGE ADJ: This includes the factors related to the image quality or special function. - H-REV : Set ‘ON’, then each side of image(left and right) is exchanged on vertical axis. - V-REV : Set ‘ON’, then image changes upside down. - TONE : As you increase the value using left or right button the whole level would be brighter. -
Page 22: Troubleshooting
Troubleshooting If you have trouble operating your camera, refer to the following table. If the guidelines do not enable you to solve the problem, contact an authorized technician. Problem Solution Nothing appears on • Check that the power cord and line connection the screen. -
Page 23: Specifications
Manufacturer Signature Full Name Position Place Date DECLARATION OF CONFORMITY 89 / 336 / EEC SAMSUNG TECHWIN CO., LTD SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 CCTV Camera SHC-730P S4120001 2004. 12. 01 EN 50081-1 : 1992... - Page 24 MEMO MEMO...
Need help?
Do you have a question about the SHC-730N/P and is the answer not in the manual?
Questions and answers