Table of Contents
Advertisement
Quick Links
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
•
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
SAMSUNG OPTO-ELECTRONICS AMERICA,INC.
•
ELECTRONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
TEL : +1-201-902-0347
FAX : +1-201-902-0429
SAMSUNG TECHWIN MOSCOW OFFICE
•
Korp 14, 37-A, PR-KT, Lenningradsky, Moscow 125167, Russia
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS UK, LTD.
•
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
•
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
P/No. : Z6806-0484-01B
VAN 05. 04
WDR COLOR CCD CAMERA with
DAY & NIGHT
INSTRUCTION MANUAL
SHC-721AN/AP/APH
About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for later reference.
SAMSUNG CCD CAMERA
Advertisement
Table of Contents
Related Manuals for Samsung SHC-721AH
Summary of Contents for Samsung SHC-721AH
-
Page 1: Instruction Manual
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS UK, LTD. • • 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Samsung House, 1000 Hillswood Drive, Hillswood Business Gyeonggi-do 462-703, Korea Park Chertsey, Surrey KT16 OPS TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145 TEL : +44-1932-45-5308 FAX : +44-1932-45-5325 SAMSUNG OPTO-ELECTRONICS AMERICA,INC. - Page 2 The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
- Page 3 Motion Detection Contact an authorized technician for inspection. The camera transmits an alert signal to SV-II DSP chip built-in SAMSUNG TECHWIN the REMOTE jack when it detects motion Stop using your camera when you find a malfunction. allows the camera to find the best picture of an object.
-
Page 4: Table Of Contents
Contents Precautions Operating Your Camera Configuration of The Menu Composition Setting Up The Menu • CAMERA ID • BACKLIGHT Name and Function of Each Part • WHITE BALANCE Front • MOTION DETECTION Side • LENS Bottom • SHUTTER SPEED CONTROL Back •... -
Page 5: Precautions
Precautions Do not install the camera in Do not install or use the camera in an Do not drop the camera or subject Never keep the camera face to extreme temperature conditions. environment where the humidity is high. them to physical shocks. strong light directly. -
Page 6: Composition
Composition Name and Function of Each Section Front 1. WDR Color CCD Camera SHC-721A C-Mount Lens Adapter Used to attach C-mount lens. Tripod Mounting Bracket Screw Hole Used to fix the Tripod mounting bracket on the top of the camera. 2. -
Page 7: Side
Name and Function of Each Section Side Bottom Tripod Mounting Hole Auto Iris Lens Connector Used to install the camera on an optional Used to connect Auto Iris Lens plug. tripod. The tripod must be equipped with the screw specified as shown below. DC/VIDEO Selection Switch Used to choose DC or VIDEO 1/4"-20 UNC (20 THREAD) -
Page 8: Back
Name and Function of Each Section Connection LENS Back The lens is not supplied with this camera. Purchase a lens suitable for your Video Output Jack environment. This camera accepts the auto iris lens and both C-and Remote Jack CS-mount lens. Used to connect an external Used to connect a remote plug. -
Page 9: Installing C/Cs-Mount Lens
Connection 3. Remove the cover from the iris lens plug supplied, and solder the lens Installing C/CS-Mount lens cable to the plug as shown below. Before mounting a lens, please check whether it is a C-mount or CS-mount lens. • Video type : •... -
Page 10: Connecting To Monitor
Connection • Mounting a C-Mount lens Connecting to Monitor 1. Attach the C-Mount lens adapter by turning clockwise. Connect the VIDEO Out jack to the monitor VIDEO In jack. CCD Camera Monitor • As the connecting method varies with the instruments, refer to the manual supplied with the instrument. -
Page 11: Connecting To Power
Connection Operating Your Camera Connecting to Power Configuration of The Menu Each model has different power specification. Please check the name of the SETUP MENU CAMERA ID (see page 23) model and power specification before connecting to power source. • OFF •... -
Page 12: Setting Up The Menu
Operating Your Camera SETUP Setting Up The Menu CAMERA ID Change the status using Select the function using the UP or DOWN button. BACKLIGHT the LEFT or RIGHT button. Use the five Setup Menu buttons on side of the camera. WHITE BAL. - Page 13 Operating Your Camera 3. Press SET button. 5. Select the position at which the camera ID will be located on the screen. Move the cursor to 'Pos' and press SET button. Camera ID Camera ID POS CLR RESET END POS CLR RESET END 4.
-
Page 14: Backlight
Operating Your Camera 4. When completed, press the SET button. Backlight Notes SV-II DSP chip built-in provides intelligent light level control to overcome the • If you select ESC or manual in ‘shutter’ menu, you can’t use WDR mode. severe Backlight conditions. •... -
Page 15: Motion Detection
Operating Your Camera S-ATW(Special Auto Tracking White balance): When color temperature is 2. Set ‘Motion Det.’ to the desired mode using LEFT or RIGHT button. 1800~6000K, specially in sodium lamp, select this mode. (EX. sodium lamp, inside the tunnel) SETUP CAMERA ID AWC(Auto White balance Control): The white balance is automatically adjusted BACKLIGHT... - Page 16 Operating Your Camera · Move the arrow indicator to 'Top' using the UP or DOWN button and increase · After setting, move the cursor to edge in any direction and then press the button or decrease the value using the LEFT or RIGHT button. Repeat the procedure just one more, let ‘End’...
-
Page 17: Lens
Operating Your Camera Manual: When using manual lens Lens Selection • If you select ‘DC’ mode, you can adjust the desired Brightness. You can set the type of the lens, and control the brightness of the screen. Notes 1. Press the SET button to display the setup menu and move the arrow indicator to 'Lens' using the UP or DOWN button. - Page 18 Operating Your Camera • You can select speed from ‘1/60’ to ‘1/200,000’sec (NTSC Models), ‘1/50’ Sense up to ‘1/200,000’sec (PAL Models). You can always get the clear image with this function under night or low- • When the shutter speed is increased or decreased using the LEFT or RIGHT lighting level.
-
Page 19: Gain
MIDDLE SPECIAL SPECIAL EXIT SSNR(Samsung Super Noise Reduction) To reduce the noise on the screen. 1. Press the SET button to display the setup menu and move the arrow indicator to ‘SSNR’ using the UP or DOWN button. 2. Set ‘SSNR’ to desired mode using the LEFT or RIGHT mode. - Page 20 Operating Your Camera 2. Press the SET button. Notes COLOR : choose color or B/W mode • When the power frequency is 50Hz, you can not use line-lock mode(NTSC Models). - ON : color mode - OFF : B/W mode •...
-
Page 21: Using Reomte Jack / Md Output
Using Remote Jack / MD Output Troubleshooting If you connect a remote plug to the REMOTE jack on the rear of the camera If you have trouble operating your camera, refer to the following table. If the as shown below, you can access the menu setup mode from a remote place. guidelines do not enable you to solve the problem, contact an authorized technician. -
Page 22: Specifications
Troubleshooting Specifications Item SHC-721AN SHC-721AP SHC-721APH Problem Solution Power Source DC 12V / AC 24V compatible AC 230V / 50Hz • Have you set ‘Motion Det.’ menu to OFF? Motion Detection Power Consumption 330mA (DC) / 4.0W (AC) 4.2W function is not active. •... -
Page 23: Declaration Of Conformity
DECLARATION OF CONFORMITY MEMO Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera... - Page 24 MEMO MEMO...
Need help?
Do you have a question about the SHC-721AH and is the answer not in the manual?
Questions and answers