Cisco SPA525G Quick Start Manual page 2

Step 3. To configure VPN, with the VPN option selected press the Right Arrow navigation
key. The VPN settings menu will open.
Step 4. The fields are explained as follows. Every field where characters are to be entered
has option softkey and delChar softkey. The option softkey when pressed gives option for
entering the type of characters like numbers,IP address, Star Code. delChar button can be
pressed to delete a character.
• VPN Server — Enter the IP Address of the VPN server to be connected. Press the Down
Arrow navigation key to get to next option.
• User Name — Enter the User Name that will be used to authenticate when getting
connected to VPN server. Press the Down Arrow navigation key to get to next option.
• Password — Enter the Password that will be used to authenticate when getting connected
to VPN server. Press the Down Arrow navigation key to get to next option.
• Tunnel Group — It is not typically required. If it is set for the VPN Server then enter the
Tunnel Group. Press the Down Arrow navigation key to get to next option.
• Connect on Bootup — This can be enabled by pressing the Right Arrow navigation key.
This will enable the phone to connect to VPN server whenever the phone is booted.
• Enable Connection — This will enable the connection.