Introduction - Market Forge Industries MT6 Owner's Manual

This manual contains general, maintenance, parts and service information for Market Forge Modular Direct
Connected Tilting Steam Jacketed Kettles. A parts list is included in which each replaceable part is identified
and shown in an accompanying illustration unless otherwise indicated.
DESCRIPTION:
Market Forge MT6 and MT10 Tilting Steam Jacketed
Kettles are mounted on a modular stainless steel cabi-
net. Double wall construction around the lower half
of the kettle forms a surrounding chamber inot which
steam is introduced as a source of heat for cooking.
Steam input plumbing is equipped with a manual con-
trol valve. Condensate is removed through a steam trap
connecting with the kettle drain plumbing assembly. A
swing nozzle, hot-cold combination faucet provides a
source of water for addition to the kettle for cooking
and cleaning.
The 6 gallon kettle is mounted in a trunnion assembly
to the modular cabinet top. The trunnion pivots include
steam input and return connections for the kettle. Kettle
tilting is accomplished manually by moving the handle
fixed to the rim so as to rotate the kettle in a trunnion.
MODELS:
MT6 / MT10
Single 6 Gallon or 10 Gallon kettle mounted on an 18" (457mm) wide x 28" (711mm) tall cabinet base equipped
for direct connection to a remote steam source.
MT6T6 / MT10T10
Two 6 Gallon or 10 gallon Kettle mounted side by side on an 36" (914mm) wide x 28" (711mm) tall cabinet base
equipped for direct connection to a remote steam source.
LFT6 / LFT10
Single 6 Gallon or 10 Gallon kettle mounted on an 18" (457mm) wide x 20" (508mm) tall Low Boy cabinet base
equipped for direct connection to a remote steam source.
LFT10T6/LFT10T10
One 6 Gallon and 10 Gallon or Two 10 Gallon kettles mounted on an 18" (457mm) wide x 20" (508mm) tall Low
Boy cabinet base equipped for direct connection to a remote steam source.

INTRODUCTION

SERVICE:
Modular kettles are exceptionally and durable cooking
equipment requiring a minimum of service other then
routine cleaning and preventive methods explained
on page 2. Should repairs be required, a network of
authorized service agencies is available to assist with
prompt service. A current directory of authorized ser-
vice agencies may be obtained by contacting:
The model and/or serial numbers must be referenced
when corresponding with Market Forge. The data plate
containing model and serial numbers pertaining to the
equipment is located inside the cabinet door on the
right vertical frame member.
1
Market Forge Ind., Inc.
35 Garvey Street
Everett, MA 02149-4403
Tel: (617) 387-4100 or (866) 698-3188
Fax: (617) 387-4456 or (800) 227-2659
Parts & Service Toll Free: (888) 259-7076
www.mfii.com/company/service
custservice@mfii.com