Advertisement
You do not need to adjust any of the settings at this stage and in the vast majority of
cases you will never need to adjust any settings manually as they are all taken care of by
the provisioning server.
You are now ready to check your firmware version, optionally upgrade your firmware and
then provision your adapter.
Important: Upgrade your device firmware to the latest version
There are many different versions of firmware for Linksys adapters and it is essential to
download the latest supported version from www.ipalarms.net/provisionlogin.aspx and
upgrade your adapter firmware.
You can check which version of firmware is currently installed on the Info tab of the
Linksys ATA web interface. If you require an upgrade, download the relevant file, save it
to a folder on your computer and carry out the following steps:
1. Extract (unzip) the downloaded file and double-click the executable (.exe) file to
start the upgrade process.
2. When the firmware upgrade warning window appears, click Continue.
3. Enter the internal IP address of your ATA in the field provided. (To find out the
internal IP address, dial **** to enter the IVR menu and then 110
The Connecting Status screen appears while a connection is in progress. Another window
appears when the upgrade is complete.
An alternative method of upgrading your firmware is to invoke the upgrade from the URL
bar of your browser. You can enter something like...
http://192.168.0.2/admin/upgrade?http://ipalarms.net/pap2t-5-1-6.bin
192.168.0.2 with the real internal IP address of your Linksys device.
To upgrade an SPA3102 with an internal IP address of 10.0.0.5 you would invoke the
upgrade with
http://10.0.0.5/admin/upgrade?http://ipalarms.net/spa3102-5-1-10-gw.bin
10 Step Guide to Provisioning
Each Linksys device needs to go through a process called provisioning before it can be
used for alarm monitoring purposes. This is a method of downloading a predefined group
of settings from a Provisioning Server into the adapter.
1. You must first reset your adapter to factory default settings by accessing the IVR menu.
Connect a phone handset to the PHONE port of your device and dial the * key four times.
A voice will ask you to
then 1 to confirm. You should hear a low tone and a voice announcing
Hang up and wait at least thirty seconds. The adapter will then be ready for provisioning.
If you do not hear
key immediately after 73738#. After several failed attempts, power cycle the device to
"Please enter option followed by the pound
"option
successful" then you should try again but this time press the 1
and replace
key". Dial
73738#
"option
successful".
and
Advertisement
