Operation - Husqvarna BLi10 Operator's Manual

• Remove the battery from the product when you do not
use it and during transportation.
• Keep batteries in storage away from metal objects
such as nails, screws or jewelry.

OPERATION

• The battery must be charged before you use it for the
first time. Always use Husqvarna QC80, or QC250
battery charger.
• Use the battery only when the ambient temperature is
between -10 °C (14 °F) and 40 °C (104 °F).
• Use the battery charger only when the ambient
temperature is between 5 °C (41 °F) and 40 °C (104
°F).
• The battery will not charge if the battery temperature is
more than 50 ° C (122 ° F).
• Push the battery indicator button to get information of
the state of charge of the battery.
To charge the battery
CAUTION:
battery charger and the terminals on the
856 - 006 - 16.04.2020
Make sure that the battery, the
battery are clean and dry. Do not put the
battery in the battery charger if it is dirty or wet.
1. Connect the battery charger to a power outlet. The
charging LED flashes 1 time.
CAUTION:
charger to a power outlet with the voltage
and frequency specified on the rating plate.
2. Connect the battery to the battery charger. The
charging LED comes on.
3. Remove the battery from the battery charger when it is
fully charged. Push the battery indicator button for
battery status. When all the LED indicators come on,
the battery is fully charged.
4. Pull the power plug to disconnect the battery charger
from the power outlet. Do not pull the power cord.
Battery LED indicator
The display shows the state of charge and if there are
problems with the battery.
Only connect the battery
5