Download Print this page

Important Safety Instructions; Operation; To Charge The Battery - Husqvarna BLi100 Operator's Manual

Hide thumbs

Advertisement

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS

WARNING:
instructions. Failure to obey the warnings and instructions
may result in electrical shock, fire and/or serious injury.
Note:
Save all warnings and instructions.
Only use the battery chargers, QC330 or QC500 to charge Husqvarna
original batteries. The batteries are software encrypted.
Use the BLi100/200/300/200X batteries that are rechargeable as a
power supply for the related Husqvarna products only. To prevent
injury, do not use the battery as a power supply for other devices.
Do not try to disassemble or repair the battery. All repairs is to be done
by an approved dealer only.
Keep the battery away from sunlight, heat or open flame. The battery
can cause burns and/or chemical burns.
Do not use a defective or damaged battery or battery charger.
Do not cause mechanical shock to the battery.
Do not remove the battery from its package until you are to use it.
Do not let battery acid touch your skin. Battery acid causes injuries to
the skin, corrosion and burns. If you get battery acid in your eyes, do
not rub but flush with water for a minimum of 15 minutes. If battery acid
has touched your skin, you must clean the skin with a large quantity of
water and soap. Get medical aid.
Keep the battery away from children.
Keep the battery clean and dry.
Clean the battery terminals with a clean dry cloth if they become dirty.
Do not keep the battery in the battery charger when it is fully charged.
4
Read all safety warnings and all
Remove the battery from the product when you do not use it and during
transportation.
Keep batteries in storage away from metal objects such as nails, screws
or jewelry.

OPERATION

The battery must be charged before you use it for the first time. Always
use Husqvarna QC330 or QC500 battery charger.
Use the battery only when the ambient temperature is between -10°C
(14°F) and 40°C (104°F).
Use the battery charger only when the ambient temperature is between
5°C (41°F) and 40°C (104°F).
The battery will not charge if the battery temperature is more than 50°C
(122°F).
Push the battery indicator button to get information of the state of
charge of the battery.

TO CHARGE THE BATTERY

Charge the battery before the first time of operation. The battery is only 30%
charged when delivered.
CAUTION:
surrounding temperature is between 5°C (41°F) and 40°C
(114°F).
1.
Put the battery in the battery charger. When the charging LED on the
battery charger comes on, the battery is connected correctly to the
battery charger.
2.
The battery is fully charged when all LEDs on the LED indicator on the
battery are on.
Only charge the battery when the
1243 - 003 - 26.03.2020

Advertisement

Table of Contents
loading

  Also See for Husqvarna BLi100

This manual is also suitable for:

Bli200Bli300Bli200xBli20