Westfalia 96 11 02 Instruction Manual page 20

Learning the halogen floodlight, Type EH151
1. To send the command to the
floodlight, hold the floodlight
and the remote control close
together. Hold the learning
key of the floodlight pressed
and observe the built-in LED.
2. Press the learning key as long
as the LED starts flashing.
Now you have totally 30 sec-
onds to emit the command
signal.
3. First select the transmission range 1, 2 or 3. Decide if you want
to turn the floodlight on and off with the pair of keys of group A or
group B. In this example select 2
pair of keys from group B.
4. Hold the AUS/OFF button of group B pressed as long as the
LED of the floodlight and the LED (5) of the remote control turns
off. Now the command signal is emitted.
5. Now you can operate the floodlight with the pair of keys of group
B in the 2
light additionally with the pair of keys of group A or if you want to
change the transmission range, repeat the above mentioned
procedure, starting from point 1.
nd
transmission range. If you want to operate the flood-
Learning
LED
nd
transmission range and the
15
Learning Key