Attaching And Operating - Westfalia Laser 2000 Instruction Manual

Attaching the Suction Hose
1. To connect the suction hose (G), insert the suction hose adaptor (J) into the
opening of the vacuum cleaner. The adaptor locks audible.
2. To remove the suction hose out, press both buttons on the side of the adaptor
and pull the hose out.
Attaching the Telescope Tube
1. Insert the handle (A) of the suction hose in the fitting opening of the telescope
tube as far as it will go.
2. To extend the telescope tube, press the release button.
If you press the button, you can adjust the length of the tube. If you release
the button, the telescope tube will lock in this position.
Attaching the Floor Brush
1. Place the floor brush (D) into the opening of the telescope tube as far as it will
go.
2. Press the foot pedal on the napped side to clean hard surfaces. In order to
suck carpets, press the smooth side of the foot pedal.

Attaching and Operating

9