Changing The Lower Access Panel - Whirlpool EC510 Use And Care Manual

4. Carefully slide the panel out. You will find the
reverse side is white. For units with white
panels showing, the reverse side will be black.
5. Choose the color you want to show and
carefully slide the panel back into the door.
NOTE: Be careful not to scratch the panel as it
is inserted.
6. Replace the handle insert and tighten the
screws in both side trim pieces. Replace the
handle and the screws.
NOTE: You can make a decorative wood front
to match existing cabinets. The panel should
be
l/4"
(6 mm) thick and 17" x 1 1
'/4"
(433 mm x 286 mm). Remove the color panel
and break off the ribs on the door insulation to
allow for wood thickness.
Changing the lower access
panel
4
0 I
1
Do not operate ice maker with lower access
Electrical Shock Hazard . 1
panel or control panel removed. Electncal
shock or personal injury could result.
1. Remove the two screws in the bottom grille area.
2. Remove the two screws from the top panel trim
and remove the top trim.
5