Table of Contents
Advertisement
Thumb screws (short)
Cleaning the interior
components
Electrical
Shock and
Product Damage Hazard
l
Do not operate ice maker with lower
access panel or control panel removed.
Electrical
shock or personal
injury could
result.
l
Do not wash plastic parts in dishwasher.
They cannot withstand
temperatures
above 145°F (63°C).
1. Turn the Cycle Control Knob to "OFF" and
disconnect the electrical power supply to the
machine. Open the storage bin door and
remove any ice that is in the bin.
2. Remove ice retainer baffle by flexing it and
then slide it off the studs.
3. Remove the ice cutter grid by unscrewing the
two thumb screws, sliding the grid forward and
unplugging the electrical wire harness.
4. Remove the water pan by unscrewing and
removing the two thumb screws and washers.
5. Remove the hose from the water pump.
11
Advertisement
Table of Contents
