Advertisement
February 2019
I1/IA ATEX Intrinsic Safety/FISCO Intrinsic Safety
Certificate:
Standards:
Markings:
Special Conditions for Safe Use (X):
1. When fitted with the transient protection option, the apparatus is not
capable of withstanding the 500 V test as defined in Clause 6.3.13 of
EN 60079-11:2012. This must be taken into account during
installation.
2. The Rosemount 752 enclosure may be made of aluminum alloy and
given a protective polyurethane paint finish; however, care should be
taken to protect it from impact or abrasion if located in a zone 0 area.
N1 ATEX Type n
Certificate:
Standards:
Markings:
Special Condition for Safe Use (X):
1. The equipment is not capable of withstanding the 500 V insulation test
required by Clause 6.5 of EN 60079-15:2010. This must be taken into
account when installing the apparatus.
ND ATEX Dust
Certificate:
Standards:
Markings:
Special Conditions for Safe Use (X):
1. Flameproof joints are not intended for repair.
2. Non-standard paint options may cause risk from electrostatic
discharge. Avoid installations that could cause electrostatic build-up
on painted surfaces, and only clean the painted surfaces with a damp
cloth. If paint is ordered through a special option code, contact the
manufacturer for more information.
Quick Start Guide
Baseefa03ATEX0239X
EN 60079-0:2012+A11:2013, EN 60079-11:2012
II 1 G, Ex ia IIC T4 Ga; (–20 °C ≤ T
See
Table 3-1
for Entity Parameters.
Baseefa03ATEX0240X
EN 60079-0:2012+A11:2013, EN 60079-15:2010
II 3 G; Ex nA IIC T5 Gc (–20 °C ≤ T
KEMA03ATEX2476X
EN 60079-0:2012+A11:2013, EN 60079-31:2014
II 2 D; Ex tb IIIC T105 °C Db (–60 °C ≤ T
Quick Start Guide
≤ +60 °C); IP66
a
≤ 70 °C); IP66
a
≤ 80 °C); IP66
a
11
Advertisement
