Advertisement
Canopy
Screw
Holes
Swing the fan up to align the canopy
screw holes with the mounting holes on
the ceiling plate.
Note: The slots in the canopy must
remain engaged while swinging the
canopy for alignment.
Canopy
Screw
Hold the canopy up with the screw
holes aligned. When all the holes are
properly aligned, securely tighten all
three canopy screws found in the
hardware bag.
8
M8552-01 • 03/04/19 • © 2019 Casablanca Fan Company
www.CasablancaFanCo.com
Canopy
Trim Ring
Canopy Trim
Ring Screw
Connect both pieces of the canopy trim
ring around the ceiling plate with the
larger diameter facing the fan. Align
screw holes on either side and fasten
with screws found in the hardware bag.
WARNING
FAN FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that the canopy is properly secured.
1.888.227.2178
Advertisement
