Advertisement
Light Kit (continued)
Connect the single-pin connectors from the
LED assembly to the connectors from the fan.
Connect the white wires together. Connect
the blue and black wires together. Tuck the
excess wiring above the LED assembly.
Wrap the keyhole slots around the screws
and twist counterclockwise.
12
M8552-01 • 03/04/19 • © 2019 Casablanca Fan Company
www.CasablancaFanCo.com
Insert the third screw, found in the
hardware bag, into place and then tighten
all three screws.
WARNING
FAN FALL HAZARD
Make sure screws are tight to secure the
light fixture.
1.888.227.2178
Advertisement
