Advertisement
Wiring: Single Switch
Have a single switch?
Follow these steps:
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualified electrician.
Refer to CAUTION c.1 on pg. 2
Connect the white
(grounded) wire
from the ceiling
to the white wire
from the fan.
White
Connect the black
(ungrounded) wire from
the ceiling to the black
wire from the fan.
Cap the blue wire from the
fan. You will not need it
for single switch wiring.
M8552-01 • 03/04/19 • © 2019 Casablanca Fan Company
Black
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
6
www.CasablancaFanCo.com
Dual Switch
Instructions
Connect the grounding
wires (green, green/yellow
stripe, or bare copper)
coming from the ceiling,
ceiling plate, and the fan.
Note: To connect the wires,
hold the bare metal leads
together and place a wire
connector over them, then
twist clockwise until tight.
1.888.227.2178
Advertisement
