Changing The Control Settings; Adjusting The Door Bins; Adjusting - Whirlpool ET22DQ Use And Care Manual

Exterior moisture control
The Exterior Moisture Control operates
electric heaters around the door openings.
These heaters help keep moisture from
forming on the outside of the refrigerator
cabinet.
l
Use the OFF setting when humidity is low.
l
Use the ON setting if moisture forms on
the outside of the refrigerator cabinet.
ExlmoRYdlsTllRE~
-117171
ON
Changing the control settings
If you need to adjust temperatures in
l
Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed
l
Wait at least 24 hours between adjust-
in the chart below as a guide. If you have
ments.
questions, call our Consumer Assistance
Center number. (See page 23.)
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION: REASON:
CONTROL SElTlNGS:
If Refrigerator
Door opened often
Refrigerator 6
Section is Large amount of food added
Freezer D
TOO WARM Room temoerature too warm
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
Refrigerator 4
Freezer A
If Refrigerator
Section is
TOO COLD
Controls not set correctly
Refrigerator 2
for your conditions Freezer A
If ICE isn't
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
Ican't cvcle often enouohl
Refrigerator 4
Freezer A
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Refrigerator 6
Freezer C
Adjusting the door bins
To remove door bins:
1. Lift bin up.
2. Pull bin straight out
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
8