Table of Contents
Advertisement
If You Need Assistance
Or
Service
This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, please provide a detailed descrip-
tion of the problem, your appliance's complete model and serial numbers and the purchase
date. (See page 2.) This information will help us respond properly to your request.
1. Before
calling
for assistance
. . .
Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. It could save you the cost of a
service call.
PROBLEM
POSSIBLE
CAUSE
SOLUTION
Your refrigera-
The power supply cord is not
Firmly plug power cord into a live
tor will not
plugged into a live circuit
circuit with proper voltage. (See
operate
with proper voltage.
page 5.1
A household fuse has blown
Replace household fuse or reset
or circuit breaker tripped.
circuit breaker.
The Refrigerator Control is
Set Refrigerator Control to a num-
not set correctly.
bered setting. (See page 7.)
Unfamiliar
There is something on top of
Remove item from on top of or
sounds
or a
or behind the refrigerator.
behind the refrigerator.
rattling/jingling
The sounds are normal.
noise
New features on your new refrigera-
tor make new sounds. (See "Under-
. .
standing the sounds you may hear'
on page 16.)
There is water
in the defrost
pan
This is normal in hot, muggy
weather. The pan may even
be half full.
Make sure the refrigerator is level so
the pan does not overflow.
The lights do
not
work
A household fuse has blown
Replace household fuse or reset
or circuit breaker tripped.
circuit breaker.
The power supply cord is not
Firmly plug power cord into a live
plugged into a live circuit
circuit with proper voltage. (See
with proper voltage.
paw 5.1
The bulb is burned out.
Replace bulb. (See page 15.)
The optional
ce maker will
lot operate
The freezer has not had
Allow the freezer time to get cold-
enough time to get cold.
this could take overnight.
The signal arm is in the OFF
Push signal arm down to the ON
(up) position.
position. (See page 11.)
The water valve is turned
Turn the water valve on.
Off.
Check the water line for clogs or
Water is not getting to the
leaks.
ice maker.
Advertisement
Table of Contents
