Maclaren Quest Manual page 7

10 REMOVING AND REFITTING THE SEAT COVER
Remove hood from buggy if fitted.
Using foot, lift the brake pedal, then press down on
the lever on the right side of the frame.
A Twist shoulder strap end buckles and feed
through holes.
B Feed waist and crotch strap through holes.
C Unclip seat cover retaining straps.
D Unfasten seat fabric from handle tubes and
seat base.
E Slide fabric from seat back and base.
F When refitting seat fabric, insert seat back
support tubes into fabric folds.
G When refitting seat fabric to seat base, loop
fabric flap over legrest strap and pass crotch
strap buckle through both holes in seat fabric
and then hole in seat base.
H When refitting shoulder straps, choose the fabric
holes appropriate to the child's size. Twist the
buckles and feed through seat fabric and then
through holes in seat back arms.
NOTICE: The seat fabric must wrapped over the top
of the handle tube and fastened by the button hole.
After assembly pull the seat fabric forward and
backward to ensure it will not come off.
11 TO OPERATE THE ADJUSTABLE LEG REST
TO EXTEND THE LEGREST: Feel through seat
corner openings. Locate sliders and pull forward.
Reverse this process to retract legrest.
12 TO REMOVE THE CARRY STRAP
WARNING: NEVER ATTEMPT TO
REMOVE CARRY STRAP WHEN THE
BUGGY IS OCCUPIED.
A Using foot, lift the brake pedal, then press down on
the lever on the right side of the frame.
B Press clip release and remove clip from 'D' ring.
C Slide strap loops from handles.
D Using the foot, push the brake pedal all the way
down until you hear a click.
NOTICE: Make sure both locks are set and look
horizontal to the ground.
The Primary lock is now engaged.
A
B
B
E
C
H
G
A
A
C
A
A
B
D
E
D
F
F
B
D
en
5