Cleaning The Brush - LG VR5940L Owner's Manual

The brush, located on the bottom of the HOM-BOT, helps with the suction of foreign objects. Perform the fol-
lowing steps to clean the brush:
Lay a smooth cloth on the floor.
Turn the HOM-BOT over and
put the HOM-BOT on the cloth.
Turn off the power switch before
cleaning.
Grab the brush and remove by
pulling it up.
Insert the fixing hook on the op-
posite side of the brush (marked
with a rounded rectangle) by
matching it to the separation
groove of the brush.

CLEANING THE BRUSH

Separate the cover by press-
ing the fixing hook and pulling
upward.
Clean the brush with a vacu-
um cleaner, scissors, etc.
Align the cover with the
fixing guides on the edge,
by matching it to the fixing
groove located on the main
frame.
Wearing gloves turn the brush
until the separation groove of
the brush appears.
Separation
groove of
brush
Insert the fixing hook on the
side of the brush (marked with
the square) by matching it to
the fixing groove of the brush.
Close the cover by pressing
it down until you hear a click
from the fixing hook.
※ NOTE: Please make sure that
the side rotating brushes are
not caught under the cover
when refitting.
23