Daikin AllWorld Eco-Rich UEHU25-M07-15-30-V Quick Start Manual

Pressure settings procedures for hybrid hydraulic unit

1. Screwdriver

2. Wrench

The following steps must be completed before any settings and adjustments

can be made to your Eco-Rich U-EHU25-M07-15-30-V:

1. Connect 3 phase power (200 VAC ~ 230 VAC)

2. Fill oil reservoir to correct oil level. (Oil Weight ISO32 ~ ISO 68)

3. Remove transport stabilizing bolts, located next to the motor isolators.

4. Connect pressure and return lines.

5. Connect alarm wires from machine (most machines do not require this step).

6. Turn power on to machine and hydraulic unit.

7. Make sure machine is in a standby state and is not actuating any valves or cylinders.

Pressure Settings Procedures

For Eco-Rich Hybrid Hydraulic Unit

Model: UEHU25-M07-15-30-V

All World Machinery Supply

Phone (815) 943-9111 ~ Fax (815) 943-5370

MPa

Table of Contents

Do you have a question about the AllWorld Eco-Rich UEHU25-M07-15-30-V and is the answer not in the manual?

Page 1 Pressure Settings Procedures For Eco-Rich Hybrid Hydraulic Unit Model: UEHU25-M07-15-30-V ITEMS NEEDED TO SET ECO-RICH: 1. Screwdriver 2. Wrench The following steps must be completed before any settings and adjustments can be made to your Eco-Rich U-EHU25-M07-15-30-V: 1. Connect 3 phase power (200 VAC ~ 230 VAC) 2.
Page 2 FIG 1: Top View Assembly MODE DOWN RETURN Initial Procedures Break locknut “A” free, using a crescent wrench. Turn the over pressure adjustment valve “B” clockwise until the adjuster bottoms out, making sure that locknut “A” is not preventing you from bottoming out the over pressure valve.