Table of Contents
Advertisement
Connections for testing
To prevent electric shock, test connections must be
configured such that the user cannot come in contact
with test leads or any device under test (DUT) that is
in contact with the conductors. It is good practice to
disconnect DUTs from the instrument before powering
the instrument. Safe installation requires proper shields,
barriers, and grounding to prevent contact with test
leads.
Do not apply more than 1000 V
terminals or more than 350 V
Failure to heed this caution may result in instrument
damage.
Do not apply more than 500 V
and the AMPS input. Failure to observe this caution may
result in instrument damage.
to the INPUT
PEAK
to the SENSE terminals.
PEAK
between INPUT LO
PEAK
Test
Advertisement
Table of Contents
