Advertisement
Parts Included:
(A) Hutch (1x)
Hardware Included:
(B) Mending Plate – 2x
Tools Required:
Philips Head Screw Driver
Assembly Instruction Steps:
1. When connecting the hutch to a Quincy Desk (sold separately), simply place the Hutch on top of the desktop.
2. Place the Mending Plates (B) over the metal inserts on the backside of the desk and hutch.
3. Secure with Machine Screws (C) using a Philips Head Screwdriver, as seen in the illustration below.
Care Instructions:
Dust often using a clean, soft, dry, and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp cloth.
•
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight.
•
Re-tighten if necessary.
Date: 2013-Apr-10
Rev:
(C) Machine Screw 13mm – 4x
(not included)
B
C
www.pbteen.com
Page 2 of 2
Advertisement
