Selecting A Cycle; The Reset Options Buttons - Whirlpool DU7503XL Use & Care Manual

Water Heating ifold Signal Light
Selecting a cycle
DELAY &ART Signal Light
Cycle Contr& Knob
POTS (Ir PANS Cycle
Maximum cleaning for cooked- &
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145°F (63°C) in both
washes and the last rinse (marked ').
Cycle time will be about IYz to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 70
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.) Cycle time is
about 60 minutes.
LOW ENERGY WASH Cycle
For pre-rinsed or lightly soiled
loads. Cycle time is about 55
minutes.
CHINA CRYSTAL Cycle
A shortened wash and gentle dry for china and
crystal. The heating element cycles on and off
during the "dry" part of the cycle. Cycle time
is about 35 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about 10 minutes.
Use AIR DRY only. Do not use HI-TEMP WASHING Option.
Changing a setting 2. Turn the Cycle Control Knob clockwise to
You can change a setting anytime during
any cycle
the Cycle you Want.
3. Be sure detergent dispensers are filled
properly for the new cycle.
1. Push in the Cvcle Control Knob to stop the
4. Pull out the Cycle Control Knob to start the
cycle. ' cycle.
The RESET OPTIONS Button
If you want to change a selected option, push
the RESET OPTIONS Button. Re-select an option, if desired.
9